Shenzhen Sanwen Optoelectronics Co.,Ltd
Call us on:+86-755-23311988   E-mail: alex@szsanwen.com
News
Home > News > Content
LED PANEL LIGHT Soft And Bright And Comfortable

Led panel lights as a new light source - led as the light source of indoor lighting, in the design highlights the beautiful simple design concept, the atmosphere of luxury momentum, with the beauty of people's eyes, unique design, through the light guide plate through The light, enough uniformity, soft light and bright and comfortable. In the lighting of the role of lighting, but also shadow the possession of a significant loss, the general light will be caused by radiation, and led panel after a special means of improvement, this concern is no longer exist. Led panel lights use is also very wide, the following is a brief introduction.

One, what is the led panel lights

LED panel light is a high-end indoor lighting, the outer frame by the anodized aluminum alloy, the light source for the LED, the entire design simple and beautiful lighting, atmospheric luxury, both good lighting effects, but also bring people The feeling of beauty. LED panel lights unique design, light through the high light transmittance of the light guide plate after the formation of a uniform flat luminous effect, illumination uniformity is good, soft light, comfortable and yet bright, can effectively alleviate eye fatigue. LED panel lights can also prevent radiation, will not stimulate pregnant women, the elderly, children's skin.

Second, led panel light accessories

1. Panel light aluminum frame:

Is the main channel of LED cooling, the appearance of simple and generous, you can use ZY0907, the use of mold stamping die low cost, processing costs are low; die-cast aluminum frame IP level can be higher, the surface texture is good, the overall appearance, but the early investment in mold costs Higher.

2.LED light source:

Often LED lamp beads use 3528, it was also used 3014 and 5050.3014 and 5050 low cost, light effect slightly worse, the key is its light guide network design difficulties. 3528 luminous efficiency of high network point of good versatility.

3.LED light guide plate:

The side of the LED light through the dot refraction of the light from the front evenly derived, light guide plate is the key to LED panel light quality control. Network design is not good, see the overall light effect is very poor, usually appear on both sides of the dark side of the dark, or there is a light band into the light, or visible local dark area, or there are different angles of inconsistency.

4.LED Diffusion Board:

The light guide plate light evenly derived, but also play a role in fuzzy network. Diffuse plate generally use the acrylic 2.0 sheet or PC material, almost the PS material, the lower the cost of acrylic and light transmission than the PC slightly higher, acrylic brittle anti-aging performance is weak, PC price is slightly more expensive, but anti-aging performance Strong.

5. Reflective paper:

The light guide plate on the back of the remaining light reflected to improve the luminous efficiency, usually RW250.

6. Rear cover:

The main role is to seal the LED panel lights, generally with 1060 aluminum, but also play a little heat dissipation.

7. Drive power:

There are two kinds of LED drive power, one is the use of constant current power supply, this mode is high efficiency, PF value of up to 0.95, cost-effective; second is the use of constant pressure with constant current power supply, stable performance, but low efficiency,

8. Install the pendant:

Suspension wire, mounting bracket, etc. for the installation of fixed accessories.

Third, led the role of the panel lights and use

LED panel lights are widely used, there is the trend instead of grille lights; LED panel lights are mainly used in: 1, ceiling (instead of the original grille lights); 2, walls (not only as lighting purposes, but also with artistic expression); 3, the installation of the body (the pursuit of practical and artistic combination, easy to install); 4, other (also available in other places, such as train cars or large mobile cars, counters, etc.).

Four, led panel lights features

LED panel lights because of the soft light, beautiful appearance, has been widely favored by European and American merchants, a large number of foreign investors are buying good quality, good service, good price of panel lights products and suppliers; it seems only a simple lighting, but because of Its high market positioning determines the customer's quality requirements for this product is extremely harsh, coupled with the product itself involves materials, optics, structure, hardware, electronics and other fields, the general company does not have a complete development team and sufficient development Experience and follow-up of the supply chain management capabilities, it is difficult to really successful development, coupled with the understanding of the market requirements are not clear, so a lot of development costs cast in exchange for only a customer does not recognize the product.

Five, led panel lights in which the main application

1, ceiling (instead of the original grille);

2, walls (not only as lighting purposes, but also with artistic expression);

3, the installation of the body (the pursuit of practical and artistic combination, easy to install);

4, other (also available in other places, such as train cars or large mobile cars, counters, etc.).

Six, led panel light principle and installation

1, can be embedded in the ceiling, walls and mounting body surface;

2, can be suspended in the ceiling or mounting body below. When the mosaic in the white ceiling, the entire ceiling was color, very beautiful, clean, coordinated;

3, LED panel lights using broadband voltage design (AC85-240V / 50-60Hz), can be used in countries around the world; high-power LED using isolated power supply, constant current or constant voltage drive, power efficiency, pollution on the grid, stable performance ,Safe and reliable;

4, LED panel light is similar to the LCD TV backlight technology, a new surface light source, soft light, beautiful appearance, has been widely favored by European and American businessmen, a large number of foreign investors are buying good quality, good service, good price panel lights products And suppliers;

5, LED panel lights seem to only a simple section of lighting, but because of its high market positioning determines the customer's quality requirements of this product is extremely harsh, coupled with the product itself related to materials, thermal, optical, structure, hardware , Electronics and other fields, the general company does not have a complete development team and sufficient development experience and follow-up of the supply chain management capabilities, it is difficult to really successful development, coupled with the understanding of the market requirements are not clear, so a lot of development costs cast in exchange for Is just a customer does not recognize the product.

Analysis on the Present Situation and Development Trend of LED Panel

2014 is a well-known led the first year of the outbreak, many product sales because of its environmental nature has gradually been recognized, and selling up, especially in the February 23-26 to the tenth Guangzhou International LED Lighting Show People will be deeply touched - no matter what business, what positioning, basically do the indoor lighting business has LED panel lights show. It can be seen that this product has never been seen, to the present mass trend, experienced a long enough time.

At this stage is the rise of the production capacity of the led, but in the rise of the product in many manufacturers to step up the pace of production, there are other issues need to be carefully considered, because many manufacturers to join the production in the future will make this product also Price war, so that although the consumer will benefit, but the price war also means that the product yield reduction, defective product frequency once the rise of the market and consumers is a double-edged sword, how to grasp New product market, many businesses need to seriously consider the issue.


Product Categories

Fast Track

  • Feedback
    Shenzhen Sanwen Optoelectronics Co.,Ltd welcomes your comments! Please fill this form to give us feedback or report any problem when experiencing our website.
  • Quick Navigation
  • Contact Us
    Address: 9 F, B2 Building, Hezhou Yang Guang Industrial Park, Xixiang Town,Bao’an District, Shenzhen, China
    Tel: +86-755-23311988    
    Fax: 86-755-27664499    
    E-mail: alex@szsanwen.com
Copyright © Shenzhen Sanwen Optoelectronics Co.,Ltd